StatMech Brushup Advice

Post Reply
darkmav
Posts: 28
Joined: Tue Jun 03, 2008 7:52 am

StatMech Brushup Advice

Post by darkmav » Mon Sep 14, 2009 10:17 am

Hi,

This question is specifically directed to those who have taken the Physics GRE or are physicists on this forum.

Any inputs/suggestions on brushing up StatMech and Thermodynamics? I've taken courses on Classical Mechanics, Electrodynamics, and Quantum Mechanics but not on StatMech. I'm an EE Major, taking the Physics Subject GRE on November 7, 2009. I've read a bit of this and that in StatMech, but haven't undertaken an organized study. I would appreciate any advice about reading essential topics, that might help me at least tackle the StatMech on the GRE later this year. I have about a month and a half to study.

Thanks in advance.
Cheers!

EDIT -- Corrected date...taking the GRE this year, not next year! :-P
Last edited by darkmav on Mon Sep 14, 2009 11:13 am, edited 1 time in total.

schwiss
Posts: 108
Joined: Fri Aug 14, 2009 3:49 am

Re: StatMech Brushup Advice

Post by schwiss » Mon Sep 14, 2009 10:56 am

I have not done GRE myself, but my school uses Reichl for the basic course of thermodynamics and statistical physics. I don't really like it, though.

For more advanced material I would suggest Landau and Lifshitz: Statistical Physics, Part one.

Edit:
Errr yeah, I did not actually answer your question explicitly at all. I recall Reichl's book had some problems, so if you learn well just by reading books, I would suggest reading the book, checking/proving any equations you deem necessary, doing exercise problems from the book, etc. Sorry, I hope others will be more helpful.

darkmav
Posts: 28
Joined: Tue Jun 03, 2008 7:52 am

Re: StatMech Brushup Advice

Post by darkmav » Mon Sep 14, 2009 11:16 am

I have been reading from Landau and Lifshitz, but I haven't gone too far because of other courses, work, etc. I know this is a bad thing to do academically, but what I really need is some kind of a crash course on statmech and thermodynamics so that I can at least tackle problems in the Physics GRE. I have studied basic thermodynamics (minus the engineering nuances) but very little of statmech so I am not quite as confident with it as I am with say QM, EM, CM, modern physics, etc.

Comments, suggestions, advice would be appreciated.

nathan12343
Posts: 249
Joined: Sat Dec 20, 2008 9:34 am

Re: StatMech Brushup Advice

Post by nathan12343 » Mon Sep 14, 2009 12:12 pm

An Introduction to Thermal Physics by Schroeder is a good pedagogical overview of the subject which we used for our senior level thermo/stat mech class. It should be a lot more conversational than Landau & Lifshitz.

physics_auth
Posts: 163
Joined: Sat Jul 18, 2009 7:24 pm

Re: StatMech Brushup Advice

Post by physics_auth » Mon Sep 14, 2009 4:00 pm

darkmav wrote:I have been reading from Landau and Lifshitz, but I haven't gone too far because of other courses, work, etc. I know this is a bad thing to do academically, but what I really need is some kind of a crash course on statmech and thermodynamics so that I can at least tackle problems in the Physics GRE. I have studied basic thermodynamics (minus the engineering nuances) but very little of statmech so I am not quite as confident with it as I am with say QM, EM, CM, modern physics, etc.

Comments, suggestions, advice would be appreciated.
Well, choosing to read Landau and Lifshitz for the PGRE could at least be considered an overkill! In fact, if sb decided to read such a book (in a very short period) then they would probably gain some initiation to statistical mech. field (in general it is considered a difficult field as all fields of modern physics) but they would have digressed from the gist of the PGRE test which is related basically to problem solving skills. Personally, since 8 or 9 out of 10 questions from thermo/stat mech are at the level of general physics I would try to focus on these topics in a general physics textbook. However, if you think that missing 1 such question is a big deal then see more advanced books like Mandl's -> focus mainly on Boltzmann statistics (i.e. the first 1 or 2 chapters).
Physics_auth

pqortic
Posts: 398
Joined: Fri Aug 29, 2008 9:24 am

Re: StatMech Brushup Advice

Post by pqortic » Mon Sep 14, 2009 4:27 pm

Yes, I either suggest you reading Halliday, Resnick general physics and solving the problems for short time study. you can't get too much solving problem skills out of StatMech textbooks and probably will lose track of other subjects.

darkmav
Posts: 28
Joined: Tue Jun 03, 2008 7:52 am

Re: StatMech Brushup Advice

Post by darkmav » Wed Sep 16, 2009 2:25 pm

Hmm ok. Well, I just thought that since the PGRE is supposed to be a test of undergraduate physics, I should at least be conversant with statmech at that level. So I was just trying to make up in some small measure for not having taken a course yet. I did see the sample booklet they sent me..it has questions on elementary thermodynamics (first law, expansions, etc.) But I was wondering if the level can be much higher than Resnick and Halliday.

physics_auth
Posts: 163
Joined: Sat Jul 18, 2009 7:24 pm

Re: StatMech Brushup Advice

Post by physics_auth » Wed Sep 16, 2009 5:56 pm

darkmav wrote:Hmm ok. Well, I just thought that since the PGRE is supposed to be a test of undergraduate physics, I should at least be conversant with statmech at that level. So I was just trying to make up in some small measure for not having taken a course yet. I did see the sample booklet they sent me..it has questions on elementary thermodynamics (first law, expansions, etc.) But I was wondering if the level can be much higher than Resnick and Halliday.
In effect, Halliday-Resnick level is sometimes higher than that of PGRE. I refer to PHYSICS not the fundamental of physics.

darkmav
Posts: 28
Joined: Tue Jun 03, 2008 7:52 am

Re: StatMech Brushup Advice

Post by darkmav » Thu Sep 17, 2009 2:06 pm

Are you referring to the Resnick,Halliday, Krane version or the older Resnick,Halliday version or the intermediate Resnick,Halliday,Walker version?

physics_auth
Posts: 163
Joined: Sat Jul 18, 2009 7:24 pm

Re: StatMech Brushup Advice

Post by physics_auth » Thu Sep 17, 2009 2:14 pm

darkmav wrote:Are you referring to the Resnick,Halliday, Krane version or the older Resnick,Halliday version or the intermediate Resnick,Halliday,Walker version?
To Halliday Resnick Krane version.



Post Reply